Loading The Tool - Stanley-Bostitch F21PL Données Techniques

GB ©Stanley Bostitch. Not to be reproduced without permission. Unauthorised copies of this
document do not constitute CE compliance for the products.
Warning! Disconnect tool from air supply before attempting any parts disassembly and before changing the work contacting
element adjustment.
F ©Stanley Bostitch. Reproduction interdite sans permission préalable. Les copies non autorisées
1. Push in Locking Button
de ce document ne signifient en rien que les produits soient conformes aux normes CE.
2. Adjust contact arm up to increase depth of drive or down to decrease it.
3. Release locking button.
D ©Stanley Bostitch. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte
Note: Metal Connector Attachment is not adjustable for depth control.
Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
DIRECTIONAL EXHAUST DEFLECTOR (FIG 6)
NL ©Stanley Bostitch. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige
The adjustable exhaust deflector can be rotated into any desired position by hand without the use of hands.
kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
UTILITY HOOK (All models fitted with grey trigger- Fig 7)
DK ©Stanley Bostitch. Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument
udgør ikke CE overholdelse for produkterne.
These tools include an additional utility hook suitable for storage and temporary hanging of the tool.
WARNING! Never use the utility hook to hang the tool from the body, clothing or belt.
SF ©Stanley Bostitch. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt
WARNING! Never use the utility hook with contact (black) trigger operated tools.
kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.
G ©Stanley Bostitch. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη

LOADING THE TOOL

εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
1. Open the magazine: Pull pusher back to engage latch. (Fig 8)
τα προϊόντα.
2. Hold nailer down with magazine tilted downwards. Insert sticks of nails. (Fig 9)
3. Close magazine: Release pusher by first puling back on the pusher and then pressing the release tab. Slide pusher against the
nails. (Fig 10)
I ©Stanley Bostitch. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
Note: Use only fasteners recommended by Bostitch for use in Bostitch tools or nails which meet Bostitch specifications.
documento non garantiscono la conformità CE per i relativi prodotti.
Warning! When installing metal connectors with the F21PL & N89RH17-2MCN: Use only one stick of metal connector nails at a
N ©Stanley Bostitch. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette time.
dokumentet oppfyller ikke kravene for CE-merking for produktet.
REMOVING NAILS (FIG 11)
P ©Stanley Bostitch. Reprodução proibida sem autorização prévia. As cópias não autorizadas
1. Disconnect the tool from the air supply
deste documento não estão em conformidade com a CE para os produtos.
2. Pull pusher back until it is securely engaged
3. Slide nails back to opening and push out
E ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
CAUTION: The pusher and pusher spring (constant force spring).
documento no suponen la conformidad con las normas CE de los productos.
Caution must be used when removing nails, as if pusher is disengaged from latch it could spring forward potentially pinching
your hand.
S ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
Extra caution should be taken when carrying out maintenance on the magazine area of the tool. The spring is wrapped around
but not attached to a roller. If the spring is stretched beyond its length, the end will come off the roller and the spring will roll up
documento no suponen la conformidad con las normas CE de los productos.
with a snap, with a chance of pinching your hand. Also the edges of the spring are very thin and could cut your hand. Care must
also be taken to insure no permanent kinks are put in the springs as this will reduce the springs force.
PL ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
GUIDE ROD INSTALLATION AND REMOVAL - F21PL, F33PT, F33PTSM, N89RH17-1 & N89RH17-2MCN
prezentowanych produktów.
Step 1 (Fig. 12): Locate guide (A); Pull and rotate cover (B).
Step 2 (Fig. 13): Locate access windows foe installation and removal of guide rod (C); Locate guide rod storage channel (D);
CZ ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Rotate cover open to install or remove guide rod (E); Install or remove guide rod through rear of magazine (F).
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
Step 3 (Fig. 14): Install guide rod through (G) for 2.8mm to 3.3mm shank nails. Rotate cover (B) to close; Install guide rod through
prezentowanych produktów. (H) for 3.3mm to 4.1mm shank nails. Rotate cover (B) to close.
SK ©Stanley Bostitch. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
dokumentu nie sú v súlade s CE pre dané výrobky.
HU ©Stanley Bostitch. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.