Patton Kamado 21 Instructions De Montage Et Mode D'emploi page 69

headed nuts per bracket. Please note the position shown in the above diagram
�ttach the �� table brackets ���� to the �amado �rill ��� using the �� pre�attached bolts and dome
STEP 13 –
headed nuts per bracket. Please note the position shown in the above diagram.
�ttach the �� table brackets ���� to the �amado �rill ��� using the �� pre�attached bolts and dome
STEP 13 –
headed nuts per bracket. Please note the position shown in the above diagram.
１５
１５
１３ ＆ １４
１３ ＆ １４
STEP 14 - �nsert the �� table hinge into each o� the table brackets ��� � ���.
STEP 14 - �nsert the �� table hinge into each o� the table brackets ��� � ���.
STEP 15 - �nstall ��� lamp on handle bracket.
STEP 15 - �nstall ��� lamp on handle bracket.
IT, CH
69
１６
１６
�
�
9
9