Patton Kamado 21 Instructions De Montage Et Mode D'emploi page 68

Assembly instructions
9
STEP 10 - To attach the handle (10) to the lid of the Kamado Grill (9) start by attaching 2x handle brackets (11)
using the 2x pre-attached bolts and dome headed nuts. Attach the handle (11) to the brackets (10) using
2x bolts (C) and nuts ( ).
Assicurarsi che il bullone superiore dello sfiato sia sulla mano sinistra durante il montaggio.
STEP 10 - To attach the handle (10) to the lid of the Kamado Grill (9) start by attaching 2x handle brackets (11)
using the 2x pre-attached bolts and dome headed nuts. Attach the handle (11) to the brackets (10) using
2x bolts (C) and nuts ( ).
12
E
12
Assembly instructions
E
STEP 11 - To attach the top vent (12) to the Kamado Grill (9) place it on top and align both the bolt holes. Secure
using 2x bolts (D) and nuts (E) . Ensure that the top vent bolt is on the left hand side when assembling it.
１５
8
STEP 11 - To attach the top vent (12) to the Kamado Grill (9) place it on top and align both the bolt holes. Secure
�
using 2x bolts (D) and nuts (E) . Ensure that the top vent bolt is on the left hand side when assembling it.
STEP 12 –
�ttach the �� table brackets ���� to the �amado �rill ��� using the �� pre�attached bolts and dome
headed nuts per bracket. Please note the position shown in the above diagram
8
H
Ensure that the top vent bolt is on the left hand side when assembling it.
H
Ensure that the top vent bolt is on the left hand side when assembling it.
IT, CH
68
10
H
11
G
C
10
H
11
G
C
D
D
9
１６
１５
9
１６