Removal From Storage; Transporting The Engine - PRO-POINT 208CC OHV Manuel De L'utilisateur

8628257 208CC OHV GAS ENGINE WITH ELECTRIC START
ADDING A GASOLINE STABILIZER
1. Fill the fuel tank with fresh gasoline.
2. Add gasoline stabilizer. Ensure that the instructions for that
product are followed.
3. Run the engine outdoors for 10 minutes to ensure that treated
gasoline has replaced the untreated gasoline in the carburetor.
4. Stop the engine.

REMOVAL FROM STORAGE

1. Check the engine as described in the section Operation -
Before Starting the Engine.
2. Fill the tank with fresh gasoline if the fuel was drained during
storage preparation.
2.1 Ensure that it contains fresh gasoline if you keep a
container of gasoline for refuelling,
2.2 Gasoline will oxidize and deteriorate over time, causing
hard starting (see Fuel).
3. An engine cylinder coated with oil during storage preparation
will smoke briefly at start up. This is normal.

TRANSPORTING THE ENGINE

WARNING! Transport the engine with an empty fuel tank or with
the fuel valve secured in the OFF position.
1. Keep the engine level when transporting to reduce the
possibility of fuel leakage.
1.1 Remove fuel and oil if possible. Refill at the destination.
2. Turn the fuel valve to the OFF position.
3. Cover to prevent contamination from weather or road
conditions.
4. Consult the user manual of the piece of equipment this
engine is mounted on for transportation instructions.
26 For technical questions call 1-800-665-8685
V 1.0