Before Starting The Engine - PRO-POINT 208CC OHV Manuel De L'utilisateur

V 1.0 208CC OHV GAS ENGINE WITH ELECTRIC START

BEFORE STARTING THE ENGINE

WARNING! Do not start or run engine in an enclosed area, even
if the doors or windows are open. Engine exhaust contains
carbon monoxide (see Carbon Monoxide Precautions).
1. Make sure spark plug (A), muffler (B), fuel cap (I) and air
cleaner (C) are in place and secured.
2. Ensure the spark plug lead is securely connected to the spark
plug, otherwise unintentional sparking can result, causing a
fire or electric shock.
3. Check the air filter. A dirty air filter will reduce engine
performance.
4. Check that all protective covers and guards are in place.
5. Check that all nuts, bolts and screws are tight.
6. Check the fuel level.
7. Check the engine oil level. Running the engine without
enough oil can damage the engine.
8. Look around and underneath the engine for signs of oil or
gasoline leaks.
8.1 Do not start the engine until any spilled fuel has
evaporated.
9. Remove any excessive dirt or debris, especially around the
muffler (B) and recoil starter (D).
10. Look for signs of damage.
11. Check the equipment powered by this engine.
STARTING THE ENGINE
WARNING! Direct-coupled equipment components such as, but
not limited to, blades, impellers, pulleys, sprockets, etc., must
be securely attached before the engine is started to avoid injury
or damage.
Visit www.princessauto.com for more information
8628257
9