Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 1.0
208CC OHV GAS ENGINE WITH ELECTRIC START
EMISSION CONTROL SYSTEM INFORMATION
The combustion process produces carbon monoxide,
hydrocarbons and nitrogen oxides. Controlling these emissions is
important for personal and environmental health.
The following instructions must be followed in order to keep the
emissions from your engine within Canadian emission standards.
1.
Do not remove or alter any part of the intake, fuel or
exhaust system.
2.
Do not alter or bypass the governor linkage or a speed-
adjusting mechanism that force the engine to operate outside
its design specifications.
PROBLEMS THAT MAY AFFECT EMISSIONS
Have your engine inspected and repaired by a qualified technician
if you are aware of any of the following symptoms.
1.
Hard starting or stalling after starting.
2.
Rough idle.
3.
Misfiring or backfiring under load.
4.
Afterburning (backfiring).
5.
Black exhaust smoke or high fuel consumption.
REPLACEMENT PARTS
The emission control systems on the engine is designed, built and
certified to conform to Canadian emission regulations. Genuine
parts are recommended when servicing the engine. Genuine
replacement parts are manufactured to the same standards as
the original parts. Using replacement parts that are not of the
original design and quality may impair the effectiveness of the
emission control system.
It is the responsibility of the aftermarket part manufacturer to
certify that the part will not result in a failure of the engine to
comply with emission regulations.
Visit www.princessauto.com for more information
8628257
19
Publicité
Table des Matières
