Remote Control Battery Replacement - Sangean WFR-20 Mode D'emploi

Remote control battery replacement

1. With the aid of the end of a paper clip slide the catch to the right
hand side.
2. Remove battery holder by pushing holder in direction shown.
3. Remove battery from holder.
4. Replace battery (CR2032 or equivalent) ensuring that the positive
side of the battery faces you with holder positioned as shown.
5. Replace the battery holder.
IMPORTANT:
The battery should not be exposed to excessive heat such as sunshine,
fire or the like. After use, disposable batteries should if possible be
taken to a suitable recycling centre. On no account should batteries be
disposed of by incineration.
9
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:12
GB
6