Disabling Alarms - Sangean WFR-20 Mode D'emploi

Disabling alarms

1. To Disable all alarms enter the alarm setup menu and Rotate the
Select control until 'Disable all' is highlighted on the display.
Press the Select control to confirm. The display will show 'All alarms
disabled' for 3 seconds then return to the alarms list display.
2. To Disable a single alarm enter the alarm setup menu and rotate the
Select control until the desired alarm is highlighted on the display.
Press the Select control. The display will show 'Enable Alarm
YES / NO'.
If NO is selected alarm is cancelled and the display returns to the
alarm list.
If YES is selected the alarm details may be changed by modifying
any or all of the alarm options.
47
50
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:14