Locating And Playing Media Files When Using Upnp - Sangean WFR-20 Mode D'emploi

Locating and playing media files when using UPnP

Once the UPnP server has been configured to share media files with
your Internet radio, you select the files that you wish to play as follows:
1. Use the Select control to switch on your radio and to access the
menus. If needed, use the Back option. Select the Media Player
menu. Rotate the Select control to highlight 'UPnP Servers'.
2. Press Select control and the radio will scan for all available UPnP
servers. Note that it may take a few seconds for the radio to
complete its scan, and that before the scan has completed the
radio may display 'Empty'. The radio will continue to display
'Empty' if no UPnP servers are found.
3. After a successful scan, rotate the Select control to highlight your
UPnP server and then press the Select control.
4. The radio will now list the media categories which are made available
by the UPnP server - for example, 'Music' and 'Playlists'. Rotate the
Select control to highlight which category you wish to browse,
then press the Select control to confirm your choice.
5. Rotate the Select control to highlight a category and press the Select
control again. For example, you could select 'Music' and then select
'Albums'.
Note:
In UPnP mode the search criteria offered and the file types made
available to the radio are a function of the UPnP server software
installed on your PC.
31
34
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13