Audio Setting (Tone Control); Switching Your Radio Off - Sangean WFR-20 Mode D'emploi

Audio setting (tone control)

Your radio has an Audio Settings menu where the bass and treble
characteristics of the sound can be adjusted to your personal taste.
1. When the radios is playing, press and hold the Select control
(or press and hold the Select button on the remote control). The radio
will select the Audio menu which allows bass and treble adjustment
as well as alternative access to the main Mode Menu.
2. If adjusting selecting bass, rotate the Select control until 'Bass' is
highlighted on the display. Press and release the Select control.
The display will show the current Bass level. Rotate the Select
control to set the desired level (between -5 and +5) and press and
release to confirm selection.
3. If selecting treble rotate the Select control until 'Treble' is highlighted
on the display. Press and release the Select control. The display will
show the current Treble level. Rotate the Select control to set the
desired level (between -5 and +5) and press and release to confirm
selection.
4. To quickly cancel any bass or treble setting, rotate the Select control
until 'Flat' is highlighted on the display. Press and release the Select
control and the equalization levels will be reset.

Switching your radio off

The Audio settings menu also provides a quick way to switch off your
radio. Give a long press to enter the menu, and then a short press to
select the Off option. Your radio will immediately enter the Standby
mode with the clock display. Alternatively you can use the Standby
button on the remote control.
19
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13
GB
16