MSA GALLET F1XF Mode D'emploi page 8

Use
4.2 Flexible Microphone Adjustment
The position of the flexible microphone can be adjusted by approximately 80 mm to properly position
the microphone.
Do not carry the helmet by the flexible microphone or any of the cables of the communication acces-
sory.
4.3 Flexible Microphone Parking Position
The device is equipped with a parking/standby position, so it can remain in the helmet without bothering
the user when not in use.
(1) Push the flexible microphone all the way
back, and rotate it downwards.
GB
8
When using without a Breathing Apparatus (BA), the microphone should be positioned
in front of the mouth.
When using with a BA, the microphone should be positioned in front of the speech
diaphragm of the facepiece. Refer to the facepiece instructions manual to locate the
speech diaphragm.
WARNING!
If the communication accessories are not going to be used for extended periods MSA
recommends to remove them from the helmet as the connection cable may bother the
user during some operations.
(1) Change the microphone position by sliding it
gently along its mounting rail.
(2) Bend the microphone until it follows the
shape of the shell as shown (inside the neck
curtain if the helmet is fitted with a neck
curtain).
®
GALLET F1XF / Cairns XF1