Connecting; Transmitter Wiring; Connecting Power - Siemens SITRANS F FUT1010 Instructions De Service

Connecting

3.1

Transmitter Wiring

3.1.1

Connecting Power

Electrical Shock Hazard
Contact with exposed wiring will lead to fire, electric shock, or serious personal injury.
Turn off main power before installing AC connections to the transmitter.
Note
If the transmitter is not already mounted and cabling has not been run, proceed to Mounting
the Transmitter (Page 13) before connecting power.
1. Open the transmitter top cover by releasing the cover latch (for IP66 NEMA 7, remove
2. Unscrew the two power supply access cover fasteners and remove access cover.
3. Locate power supply connector J10. Using a flat blade screwdriver, remove plug from
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Gas Quick Start
Operating Instructions, 1/2013, A5E02639183-AC
DANGER
bolts).
connector J10. Set aside.
3
23