Figure 4-1 Startup Screen - Siemens SITRANS F FUT1010 Instructions De Service

Commissioning
4.2 Commissioning
1. Apply power.
2. Within 10 seconds of power-up the main display will become active and a typical
3. The transmitter is ready to report flow. Press <MENU> key twice to display flow.
36
Siemens graphic will appear briefly. The screen also identifies the software version of the
unit as shown below.
①
Software operating system version
Figure 4-1 Startup Screen
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Gas Quick Start
Operating Instructions, 1/2013, A5E02639183-AC