Scan Documents; Scan Pictures - HP scanjet 8200 Série Guide De L'utilisateur

scan from other applications
You can bring an image directly into an open file in one of your applications if
the application is TWAIN compliant. Generally, the application is compliant if it
has a command such as Acquire, Scan, or Import New Object. If you are unsure
whether the application is compliant or what the command is, see the
documentation for the application.

scan documents

Use the S
1 Place the originals face down on the scanner glass or face up in the ADF. If
you are scanning two-sided originals from an ADF, slide the D
to two-sided mode ( ).
2 Select a destination by pressing the D
desired destination appears in the front panel display.
3 Press the S
Note: A preview image will not appear when scanning from the ADF. To
change this preview setting, see the HP Photo & Imaging software Help.
4 Select the final scan area (the area inside the dotted lines) in the preview
image.
5 Make adjustments to the preview image if needed.
6 Click Accept.
The final scan area is scanned and appears in the specified destination.

scan pictures

Use the S
1 Place the original face down on the scanner glass and close the lid.
Note: You can also use the S
from the TMA. For more information, see scan from the TMA on page 15.
2 Press the S
A preview image of the scanned original appears.
3 Select the final scan area (the area inside the dotted lines) in the preview
image.
4 Make adjustments to the preview image if needed.
5 Click Accept.
user's manual
D
button (
CAN OCUMENT TO
D
CAN OCUMENT
P
button (
CAN ICTURE
P button (
CAN ICTURE
The final scan area is scanned and appears in the HP Photo & Imaging
Gallery. The scan is saved in the location specified in the Scan Pictures
Settings in the HP Photo & Imaging software.
) to scan documents.
button ( ) until the
ESTINATION
T button ( ).
O
) to scan pictures.
button to scan slides or negatives
CAN PICTURE
).
how to use the scanner
switch
UPLEX
5