Adjusting The Computer Picture - Sony KL-W7000 Mode D'emploi

Adjusting the
computer picture
Adjusting the position (CENTER)
VIDEO RGB
CENTER/
SIZE
After projecting the picture from a computer, you may
need to adjust the position of the picture to fit the
monitor screen. You can also move the picture as you
like. The setting is only for the input signal displayed
on the screen.
1
Press CENTER/SIZE until the CENTER
adjustment screen appears.
CENTER/
SIZE
2
Press B, b, V or v to adjust the position.
For horizontal adjustment press B or b. (H
CENTER)
b: to move the picture right
B: to move the picture left
For vertical adjustment press V or v. (V CENTER)
V: to move the picture up
v: to move the picture down
16 -EN
Operations
WIDE
MENU
ENTER
CENTER
H CENTER
V CENTER
The CENTER adjustment screen automatically
disappears after about 10 seconds if you do not press
any button. You can also erase the CENTER adjustment
screen by pressing CENTER/SIZE again.
To reset to the factory preset setting
Press RESET on the monitor. At the same time, the
picture size (page 17) and video/audio settings (pages
18 to 22) are also reset to the factory preset levels.
Note
• You can adjust the position by using the CENTER/SIZE and
ı/◊ /√/∫ buttons on the monitor.