Additional Information; Cleaning The Air Filter - Sony KL-W7000 Mode D'emploi

Additional Information

Cleaning the air
filter
The air filter should be cleaned once a month. When it
becomes difficult to remove the dust, replace the filter
with a new one. To clean the filter, follow the steps
below.
1
Turn off the power switch on the monitor
and unplug the power cord.
2
Remove the front panel from the monitor.
Hold the monitor tightly.
Pull the panel towards you, holding its left
end. Be careful not to damage your nails.
3
Pull the air filter upwards to remove.
24 -EN
Additional Information
4
Remove the dust from the filter with a
vacuum cleaner.
Vacuum cleaner
5
Attach a new filter to the monitor.
Fit the six projections securely.
6
Mount the front panel.
Be careful not to injure the speakers.
Notes
• Clean the air filter periodically. Otherwise, the temperature
inside the monitor may rise abnormally.
• Do not use a torn filter. Fit the six projections on the filter to the
monitor securely. Dust inside the monitor may cause distorted
picture and also fire.
• Be sure to attach the air filter securely. Otherwise, the monitor
will not turn on.
• Contact your Sony dealer for a new filter.