Optional Accessories (Not Included) To Use Glomex Antennas; Necessary Tools For Assembly (Not Provided) - Glomex DANUBE R8500 Manuel D'installation Et Utilisation

3.1 OPTIONAL ACCESSORIES (NOT
INCLUDED) TO USE GLOMEX
ANTENNAS
To be able to use your new GLOMEX satellite
antenna for river boats, you will have to procure or
buy also:
- a TV set;
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
Optional accessory
Satellite receiver TIVÙSAT
230 VAC - 12 VDC
XDome terrestrial digital - satellite HD combi
receiver (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
SD card with new satellite
SD card with software update
4. NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- Drill tips: 8 mm for fastening the radome,
2.5 mm for built-in installation of the control unit
and 12 mm for the passage of the cable (2).
- Phillips screwdriver (3).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (4).
- 2 mm Allen wrench (for M4 dowels) (5).
- Reciprocating saw (to create the compartment
for wall built-in installation of the control unit; use
the template provided on page 51) (6).
- Sealant like SIKAFLEX®252 or similar (7).
www.glomex.it
I-CAN 1110 SV
Fig. 2
Plan the whole installation before proceeding!
Please consider the lay-out of the various compo-
nents, the distance between them, the length of the
various cables and the accessibility to the equip-
ment once it is installed.
43
DANUBE R8500
GLOMEX code
V9193
V9192
4.120.0077
4.120.0078
S
WARNING