Using The Protective Equipment - GOLDSCHMIDT SMARTWELD SPARK Thermit Mode D'emploi

SMARTWELDSPARK
» Be instructed in regular intervals about difficulties, hazards and
rules of conduct.
» Pay attention to personal safety and the safety of others, and to
orderliness and cleanliness when working with and using equipment.
» Always use the appropriate personal protective equipment to ensure
a safe work environment (see chapter 6.5).
6.5

Using the Protective Equipment

The electric Thermit
of the Thermit
tective clothing stated by Elektro-Thermit GmbH & Co. KG in the work instructions
for the Thermit
Always obey the provisions for use of the protective equipment. Otherwise,
hazards to persons and property may occur.
Always wear the following protective clothing when working with the electric
Thermit Igniter SMARTWELDSPARK:
®
36 36
INSTRUCTION MANUAL
Igniter SMARTWELDSPARK initiates the chemical reaction
®
portion. The required protective equipment is identical to the pro-
®
welding procedure.
®
Fire-proof Protective Clothing
Wear fire-proof protective clothing during all welding work
in the track area to protect your skin from heat, fire or other
related hazards.
Safety Glasses
Use a Welding Filter 6 during the reaction of the Thermit
portion to protect your eyes from heat and light hazards.
Fire-proof Gloves
Always use fire-proof gloves for all welding work to protect your
hands from burn hazards
®