Assembly; Cleaning Formulas - Bissell CROSSWAVE 1785 Série Mode D'emploi

Assembly

WARNING
Do not plug in your CrossWave® until you are familiar with all instructions
and operating procedures.
1 Insert handle
into body of
unit until you
hear a click.
click
4
NOTE:
To easily unwrap the cord for use, just turn the quick release cord wrap downward
to remove the cord from the cord wrap.

Cleaning Formulas

WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only
BISSELL cleaning fluids intended for use with the hard floor device.
Keep plenty of CrossWave® formulas on
hand so you can clean your hard floors
and area rugs whenever it fits your
schedule.
Always use CrossWave® formulas
in your machine. Other solutions
may harm the machine and void the
warranty.
Then, on the back
2
of the machine,
align clean water
tank with the
grooves and slide
tank into place
until you hear a
click.
The Easy Clean Storage Tray consists of a
machine storage tray and a brush roll drying
tray. To assemble the Easy Clean Storage Tray,
align arrows on the storage tray with the arrows
on the brush roll drying tray and slide into place.
Multi-Surface
Great for cleaning
ALL sealed floors
and area rugs
3
Wrap the cord around the
quick release cord wrap
and the lower cord wrap.
CROSSWAVE® FORMULAS
Wood Floor
Formula Formula
Restore your wood
floors' natural shine
Area Rug Formula
Removes stuck on
and embedded dirt
from area rugs
www.BISSELL.com
5