Bissell CROSSWAVE 1785 Série Mode D'emploi page 12

Maintenance:
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
Place unit on self-cleaning
storage tray.
4
Recline the machine while in storage tray.
Allow the machine to run for 10-15 seconds
until all water is picked up. Repeat as needed.
6
Pull brush roll out by grabbing the
brush roll tab and pulling upward.
12
www.BISSELL.com
Easy Clean Storage Tray
2
Pour water to the MAX line of
the self-cleaning storage tray.
3
Turn the machine ON by
pressing the Hard Floor
button.
5
Grasp brush roll window at the front of the
window and pull upward to remove.
7
Place the brush roll upright in the Brush Roll
Drying Tray to dry.