Machine Storage - Bissell CROSSWAVE 1785 Série Mode D'emploi

Maintenance:
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
8
9
Replace the brush roll window by first lining up the brush window tabs with the edges of the foot.
Then press the window back into place until you hear a click.

Machine Storage

Put the unit away in a closet or basement until the next use. Store
cleaner in a protected, dry area. Since this product uses water, it
must not be stored where there is a danger of freezing. Freezing will
damage internal components and will void the warranty.
NOTE: Any solution remaining in the clean water tank should be emptied prior
to machine storage.
Easy Clean Storage Tray
Replace brush roll by inserting the brush
roll end into the right side of the foot. Then
lock the pull tab into place by pressing
downward.
www.BISSELL.com
13