will flash green which shows that
DE
the Gamepad is now charging. You
GB
can use the Gamepad wirelessly as
soon as the green LED does not glow
FR
anymore. To do this, plug the USB
ES
receiver into any free USB port on
the console. Now press the "Start"
IT
button on the Gamepad to establish a
connection to the PS
3.
®
12
The Gamepad does not have a "Motion
Sensor". Therefore, please switch off
the sensor function in the menu of the
particular game.
Note: The Gamepad will automatically
go into stand-by mode after two
minutes of inactivity. Press "Start" or
"Select" to reactivate the Gamepad.