Speedlink D-Struct SL-4441 Mode D'emploi page 11

Contents
PS 3 Gamepad
®
USB receiver
Frequency: 2.402 - 2.479 Mhz
User manual
Conformity
Herewith Jöllenbeck GmbH declares
that the device D-Struct Gamepad,
SL-4441 conforms with the
relevant requirements and standards
of the 1999//EG directive. You may
request a full declaration of conformity
under the address shown on the last
page of this manual.
System requirements for the PC
Windows® 98/ME/2000/Vista
USB port
Connecting to the PS
Before you can use the Gamepad
wirelessly you must first charge it using
the PS 3. To do that, plug the small
®
USB connector on the original PS
charge cable into the Gamepad and
the USB connector on the other end
of the cable into any free port on the
PS 3. Switch the console on. Now
®
switch the gamepad on. The on/off
switch is located on the back of the
Gamepad. The LED on the Gamepad
11
DE
GB
FR
3
®
ES
IT
3
®