Important Safeguards - Comelit SPTZ10IR Mode D'emploi

IMPORTANT SAFEGUARDS

1. Read these instructions before attempting installation or operation of this dome.
2. Keep these instructions for future reference.
3. Heed all warnings and adhere to electrical specifications. Follow all instructions.
4. Clean only with non abrasive dry cotton cloth, lint free and approved acrylic cleaners.
5. Should the clear dome of the camera become dirty, use a special lens cleaning cloth
and solution to properly clean it.
6. Do not block any ventilation openings. Install in accordance with manufacturer's
instructions.
7. Use only attachments or accessories specified by the manufacturer.
8. Verify that the surface you are planning to use for attaching the dome can adequately
support the weight of the device and mounting hardware.
9. Protect this device against lighting storms with proper power supplies, surge arrestors
and other protective precautions.
10. Refer all servicing to qualified service personnel. Servicing is required when the device
has been damaged in any way, when liquid traces are present, or the presence of loose
objects is evident or if the device does not function properly, or has received sever
impact or has been dropped accidentally.
11. Do not use this product under circumstances exceeding specified temperature and
humidity ratings.
12. Avoid pointing the camera directly to the sun or other extremely bright objects for
prolonged period of time avoiding the risk of permanent damages to the imaging sensor.
13. The attached instructions are for use by qualified personnel only. To reduce the risks of
electric shock, do not perform any servicing other than contained in the operating
instructions unless you are qualified to do so.
14. During usage, the user should abide by all electrical safety standards and adhere to
electrical specifications for the operation of the dome. The control cable for RS485
communications as well as the video signal cables should be isolated from high voltage
equipment and high voltage cables.
15. Use supplied power supply transformer only.
1