Dome; Preset; Scan; Guard Tour - Comelit SPTZ10IR Mode D'emploi

4.2 Dome

4.2.1 Preset

<PRESET>
PRESET NO
CALL PRESET
<SET PRESET>
EXIT
<PRESET>
PRESET NO
CALL PRESET
<SET PRESET>
PRESET 1: SAVE
PRESET 2: BACK

4.2.2 Scan

<SCAN>
SCAN SPEED
EXIT

4.2.3 Guard Tour

<GUARD TOUR>
GUARD TOUR NO
CALL GUARD TOUR
<GUARD TOUR >
EXIT
14
 PRESET NO: Select the preset number to be SET or
CALLED.
001
 CALL PRESET: Calls the preset number selected above.
 <SET PRESET>: Writes the current camera position into the
preset location entered above. To write the preset, enter the
command on your PTZ controller for "Call preset 1". To cancel
the write operation, enter the command on your PTZ controller
for "Call preset 2".
001
Because some presets are used to operate special functions,
they can't be set and called normally.

SCAN SPEED: setting the speed.
9
The camera can save 4 guard tours. Each tour has 16 points
(presets) and each point can have its own dwell time and
1
speed.
 GUARD TOUR NO: Choose tour 1 thru 4.
 CALL GUARD TOUR: Calls the guard tour.