Instruction; Power Up Action; Basic Function - Comelit SPTZ10IR Mode D'emploi

3.Instruction

3.1 Power Up Action

IR SPEED DOME
PROTOCOL PELCO-D/P
COMM
DOME ID
MODULE
VERSION
PAN
TILT
POWER ON
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM
DOME ID
MODULE
VERSION
PAN
TILT
POWER ON
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM
DOME ID
MODULE
VERSION
PAN
TILT
POWER ON

3.2 Basic Function

Dome Operation
Use the control joystick up, down, left or right key on the keyboard.
Zoom
Press ZOOM- button to zoom "out" for a wider field of view for close objects.
Press ZOOM+ button to zoom "in" for a narrower field of view for distant objects.
11
When initializing the system, the OSD screen shown at left will
appear after 2 seconds.
When restoring the original factory settings, please wait
2400.N.8.1
patiently. The restore process takes roughly 1 minute to run.
001
INIT
INIT
This screen shows that the initialization of the pan/tilt motors
has completed.
2400.N.8.1
001
OVER
OVER
Power up self-testing has completed.
2400.N.8.1
001
XXX
XXX
OVER
OVER