Product Familiarisation - Silverline 255234 Mode D'emploi

Kit de protection anti-chutes

Masquer les pouces Voir aussi pour 255234:

Mode d'emploi (79 pages)

Guide de sécurité (17 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Safety Instructions for Height

Safety Equipment

WARNING: Activities involving the use of this equipment are inherently

dangerous. ALWAYS carry out a risk assessment before work commences,

including rescue arrangements.

WARNING: Specific training is essential before using this equipment. It

must only be used by competent and responsible individuals, taking care not

exceeding the limitations of the equipment.

WARNING: Failure to adhere to any warnings and recommendations given

in these instructions may result in severe injury or even death! When using this

equipment you personally assume all risks and responsibilities for all damage,

injury or death which may occur during or following incorrect use of this

equipment. You are responsible for your own actions and decisions. If you are

unable, or not in a position to assume this responsibility or to accept these

risks, DO NOT USE THIS EQUIPMENT.

a) NEVER use equipment that has exceeded its shelf and/or service life.

b) This product MUST NOT be stressed beyond its strength rating.

c) DO NOT use components of fall arrest gear outside its limitations, or for

applications for which they were not specifically designed.

d) Avoid impacts and rubbing against abrasive surfaces during use,

transport and storage.

e) DO NOT use connectors with manual locking mechanisms in areas

where they are frequently opened and closed.

f) Ensure locking mechanisms and safety devices engage securely and

connectors are fully closed and locked before use.

g) NEVER combine components that are not recommended by the

manufacturer as being compatible. One item may interfere with the safe

function of another, jeopardising the function of the system as a whole.

h) NEVER attach a fall arrest system to an anchorage if you are unsure

about the strength and condition of the anchorage.

i) Take into account the length of every single component of a fall arrest

system, including the connectors, when determining the total length

of the system.

j) The clearance under the user must be sufficient to prevent him from

striking an obstacle in the event of a fall.

k) DO NOT allow any part of a fall arrest, work positioning or restraint

system to come into contact with sharp edges or abrasive surfaces

during use. Reposition if necessary or choose an alternative anchorage.

l) Any component of a fall arrest system must be individually inspected

according to the manufacturer's recommendations and procedures.

After assembly, the system must be inspected as a functional unit.

m) Any kind of repair or modification of this equipment is strictly

PROHIBITED.

n) DO NOT tie knots in harnesses, lanyards and ropes. DO NOT allow

equipment to become tangled.

o) Equipment that has been exposed to extreme conditions, failed an

inspection, or has been used to arrest a fall, must be retired and

destroyed. Never expose items made with synthetic fibre components to

direct flames.

p) DO NOT use shock absorbers that have been partially deployed, or when

the plastic sheath is damaged.

q) Destroy retired equipment immediately to prevent further use.

r) All users of fall arrest gear must be medically fit for activities at

height and must wear appropriate personal protective equipment for

the environment, work carried out, and tools used.

s) Carry out a risk assessment for every activity, and define a rescue plan

that can be safely and rapidly executed in case of emergency.

t) All product markings must remain intact and clearly legible for the

entire service life of this equipment.

u) Store the equipment with its dedicated service record and usage

instructions. Gear with uncertain service history must be removed from

service and destroyed.

v) Before using this equipment, ensure that it complies with local federal

regulations and other applicable safety standards.

w) Textile products, including webbing and ropes, MUST NOT be marked

using ink from marker pens or paint, as these substances may potentially

lead to chemical damage of the material.

x) Store in accordance with the manufacturer's instructions.