Télécharger Imprimer la page

Altec Lansing T515 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Muting the Detachable
Headset Microphone
To mute or un-mute the microphone
temporarily, press
A tone indicates the microphone is
muted.
Turning On/Off
the Buzzer
Press the
and
1 second to enable the buzzer. A tone
indicates the buzzer is activated.
Press the
and
1 second to disable the buzzer. A tone
indicates the buzzer is disabled.
Note: When the buzzer tone is on,
press
or
to stop the buzzer temporarily.
Transferring Calls
To transfer a connected call from your
Headset to your mobile handset or vice
versa, press the
A tone indicates the transfer has
begun.
Reconnecting After
Going Out of Range
If the Bluetooth link between the
Detachable Headset – whether it is
used with the speaker system or with
the headphones – and your Mobile
Handset is broken, follow these steps
to re-establish it:
1. Press the
button.
2. Press the
button for 3 seconds.
This will transfer the audio from the
Mobile Handset back to the
Headset/Speaker System.
for 3 seconds.
buttons for
buttons for
button for 1 second
button for 3 seconds.
Note: If you were on a call when the
link between your Headset and your
Mobile Handset was lost, the call will
automatically transfer to your Mobile
Handset.
Listening to Music
from the
Speaker System
To listen to music from the Speaker
System, turn it on and put the
Detachable Headset into it.
Using the Speaker
System with other
Audio Sources
The Line In Jack for other audio sources
is located on the back of the Speaker
System. Use it to connect any audio
source that has a stereo 3.5 mm plug
(i.e., headphone-style plug.)
Caution: Make sure the audio source
features a line-out jack. This ensures
that the output is not amplified. Check
the owner's manual for your audio
device for more information.
Troubleshooting
If you cannot solve the problem with
this manual, try switching your
Detachable Headset and your mobile
handset off and on again.
12

Publicité

loading