Télécharger Imprimer la page

Altec Lansing T515 Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Second Incoming Call
When you receive a second incoming
call, press the
once to accept the incoming call and
put the current call on hold. Press the
button once to switch between callers.
Ending Calls
To end a call, press the
the Headset once.
You can also end the call using your
mobile handset in the normal way. You
hear a tone when the call ends.
Ring Tones
When there is an incoming call, the
mobile handset's ring tone plays
through the Headset on the ear phones
or the Speaker System.
If the built-in ring tone is not
supported, the default ring sounds and
the blue indicator light flashes.
Rejecting Calls
Press the
button once to reject an
incoming call during ringing.
You can also reject the call using your
mobile handset in the normal way. You
hear a tone when the call is rejected.
Dialing from Your Mobile Handset
Simply make calls on your mobile
handset in the normal way.
Voice-dialing from Your
Detachable Headset
If your mobile handset is equipped
with a voice-dialing function, press the
button on your Headset for 1 second,
and say the voice tag. You hear a tone
when the voice tag is registered. Press
the
button to cancel the voice tag.
Note: Be sure to record voice tags into
the mobile handset before using voice-
dialing function.
button on the Headset
button on
Redialing the Last Number from Your
Detachable Headset
To redial the last number stored in your
mobile handset, press the
1 second. You hear a tone when the
number is redialed. Press the
to cancel redialing.
Adjusting the
Volume of Your
Detachable Headset
Increasing the Volume
Press the
increase the volume one step at a time.
When you reach maximum volume, you
hear a tone on the ear phones.
Decreasing the Volume
Press the
decrease volume one step at a time.
When you reach the minimum volume,
you hear a tone on the ear phones.
Note: When the Headset is docked on
the Speaker System, the volume is set
to a pre-defined level, and the
buttons on the Headset are
disabled.
Adjusting the Volume
of the Speaker System
Increasing the Volume
Press the
System to increase volume one step at
a time.
Decreasing the Volume
Press the
System to decrease volume one step at
a time.
11
button for
button on the Headset to
button on the Headset to
button on the Speaker
button on the Speaker
button
and

Publicité

loading