MAXDATA PRO 660T Mode D'emploi page 64

APPENDIX B - TROUBLESHOOTING
solution:
Press the Fn +F4 key combination,or press the On/Off switch if no LEDs are lit
indicator:
A software conflict made the system „crash „.
solution:
o Consult your operating system manual.
o As a last resort, since you will lose any unsaved data, try to reboot the system
or if that doesn´t work,turn the computer off and on again.
WARNING MESSAGES
Each time you boot up, the computer performs a self-diagnostic check. If there
is an error, a short message will appear to identify it. You should refer to the
expanded User´s Manual for an explanation of what to do.
64