30
5.1
MINIMUM CLEARANCE TO COMBUSTIBLE ENCLOSURES
IMPORTANT: The LHD45 requires a minimum inside enclosure height of 56"
bottom of the appliance. For temperature requirements, this area must be left unobstructed. It is recommended
EN
that the enclosure be ventilated at the top and bottom to circulate the hot air.
56 "
1422mm
MINIMUM
ENCLOSURE
HEIGHT
TOP OF
FIREPLACE
OPENING
* See "VENTING" section.
W415-1335 / 06.27.14
VENT HEAT SHIELD
2" 51mm
18 3/16"
462mm
30 11/16"
780mm
MIN
14"
NON-COMBUSTIBLE
356mm
12 1/2"
MATERIAL
317mm
25 5/16"
643mm
MIN
NON-COMBUSTIBLE
COMBUSTIBLE
SHELF
6" 152mm
MIN
1" 25mm
(1422mm),
measured from the
2" 51mm
0" (0mm) IF NON-
COMBUSTIBLE
FINISHING IS USED
SUCH AS BRICK AND
STONE
1" 25mm
45 13/16"
1164mm
MIN PLUS
RISE*