Table Des Matières - NSK Surgic Pro Manuel D'utilisation

Original Operatrion Manual
Thank you for purchasing the NSK Surgic Pro series surgical unit.
We recommend that prior to use, you carefully read this document regarding instructions for use, handling method, or
maintenance check so that you can carry on using the unit in the future. In addition, keep this operation manual in a place
where a user can refer to it at any given time.
Intended to Use
Surgic Pro series is intended for use in dental oral surgery by qualified personnel.
1. Safety precautions prior to use
2. Package Contents
3. Control Unit and Foot Control
4. Installation
5. Setting
6. Operation
7. Protection Circuit
8. Error Code & Troubleshooting
9. Fuse Replacement
10. Maintenance
11. Sterilization
12. Contra Angle Handpieces and Accessories
13. Specification
14. Disposing Product
15. Symbols
16. EMC Information
Classification of equipment
• Type of protection against electric shock :
- Class l equipment
• Degree of protection against electric shock :
- Type BF applied part
• Method of sterilization or disinfection recommended by the manufacture :
- See 11. Sterilization
• Degree of protection against ingress of water as detailed in the current edition of IEC 60529 :
- Foot Control: IPX8 (Protected against the effects of continuous immersion in water)
• Degree of safety of application in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous
oxide :
- Foot Control: Category AP Equipment
• Mode of operation :
- Intermittent operation
Contents
1
English
2
4
5
7
10
12
16
16
18
18
19
20
20
20
21
21