Emptying The Container - Storch VacTec 25 Mode D'emploi

4.1 Cleaning the filter
The vibration function (switch setting
R or RA) should be activated at the
latest when the volume flow display
(warning lamp) lights up or when the
warning signal sounds or when the
suction output sinks.
4.2 Automatic cleaning
Filter cleaning is performed (switch
setting RA) automatically during the
next working break when the mini-
mum volume flow level is reached.

5. Emptying the container

NOTE
Only permitted for dust with AGW's
> 1mg/m
3
Switch the vacuum cleaner off, pull
the mains plug out.
Open the latches.
Remove the cover and suction hose
from the container.
Empty the container by pouring out.
5.1 Dispose of the fleece filter bag
Pull the mains plug out.
Fit mouth protection.
Remove suction hose, close off the
suction spigot with folding cover.
Open the side latches, remove the
top section.
Carefully pull the flange off the sucti-
on spigot and close off the flange.
Dispose of the vacuumed up mate-
rial in accordance with legal require-
ments.
5.2 Dispose of the PE emptying and
disposal bag
PE emptying
Switch the vacuum cleaner on, shake
the folding filter cassettes. Switch off
the vacuum cleaner.
Fit mouth protection.
Remove suction hose, close off the
suction spigot with folding cover.
Open the side latches, remove the
top section.
Before setting aside the top section,
switch to >I< position, to draw up any
floating dust which may exist.
Close off the PE emptying and dispo-
sal bag carefully with the tape provi-
ded.
Carefully pull the flange off the sucti-
on spigot and close it off.
Remove the PE emptying and dispo-
sal bag carefully from the container
Dispose of the vacuumed up mate-
rial in accordance with legal require-
ments.
5.3 Insert fleece filter bag
NOTE
Only use fleece filter bags for dry
vacuum cleaning.
Slide the flange completely over the
suction aperture.
NOTE
Operating the rotary slider
Set rotary gate valve to „Close" posi-
tion.
91 Translation of the original instruction
and disposal bag: