Indicator And Operating Elements - Storch VacTec 25 Mode D'emploi

1. Indicator and operating elements

Select from the following functions and settings:
0 Vacuum cleaner is
switched off
I Vacuum cleaner is
running
A Ready mode for
ON/OFF automatic
mode
R Filter cleaning
function
RA Ready mode for
ON/OFF automatic
mode
Automatic shaker
function
Fill level
indicator *
Speed regulation * The suction performance can be regulated using
Setting the suction
hose diameter *
*depending on the equipment variant of your vacuum cleaner
Translation of the original instruction
Plug socket current-conducting
Plug socket current-conducting
Automatic shaker function off,
audible warning signal off
Plug socket curren-conducting
The vacuum cleaner is switched on and off via the
connected electrical tool at the plug socket
In this switch setting the vibrator is activated for
approx. 10 sec. and then switches off again auto-
matically
Ready mode like >A< plus automatic filter
cleaning
Filter cleaning is performed (switch setting RA)
automatically during the next working break when
the minimum volume flow level is reached
When the container is full and/or there is a
blockage in the suction hose, the full indicator
lights up
On the M and H vacuum cleaners, an acoustic
signal is also emitted
the speed regulator
Determine the maximum negative pressure for
automatic shaking
88