Storch VacTec 25 Mode D'emploi page 92

Set rotary gate valve to „Close" posi-
tion.
Place the upper section on the conta-
iner and close the side latches.
(* depending on the equipment vari-
ant)
5.4 Insert PE emptying and disposal
bag*
NOTE
Only the vacuum cleaners class M
and H with special containers and
rotary slider in the suction aperture
are suitable for the use of PE Emp-
tying and disposal bags.
NOTE
Operating the rotary slider
Set rotary gate valve to „Open" posi-
tion.
Slide the flange completely over the
suction aperture and place the upper
bag opening over the edge of the con-
tainer.
Translation of the original instruction
Place the upper section on the conta-
iner and close the side latches.
(* depending on the equipment vari-
ant).
Note:
The PE emptying and disposal bag,
art. no. 65 15 56 is exclusively desi-
gned for the VacTec 25 M!
1.
Open the two latches on the catch-
ment container and lift the vacuum
motor unit off the container.
2.
Remove any existing filter bags.
3.
Note the vacuum fitting on the inside
of the catchment container:
92