Spypoint LIVE Manuel De L'utilisateur page 8

Masquer les pouces Voir aussi pour LIVE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14
Stamp:
Select
(Yes/No)
temperature and moon phases on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Temp.
Changes the temperature display.
format:
(°F/°C)
Theft alert:
In case of theft, enabling this option allows the
(Yes/No)
camera to instantly switch into an alert state and
to begin sending pictures on the user account
starting with the most recent ones.
Note: Photos are sent in "Large" format only.
Also, the user receives an alert message to
his email address or by an SMS message
to his cellphone (fees may apply for SMS
messages) giving information about when the
camera was moved for the last time (See "SMS
Configuration" for details).
or
cancel
imprinting
date,
time,
Power:
(Batteries/
Electricity)
Language:
(English/Français)
Allows the user to select the type of power supply.
Choose "Electricity" if the camera is powered
of a main electric supply. (using a 12 volt DC
adapter AD-12V, sold separately). Main electric
supply is recommended for security purposes. It
provides an instant trigger time when a movement
is detected. We recommend that you remove the
AA batteries when this power supply is used.
Although, lithium battery pack can remain safely
inside the camera and it is ideal in case of a
blackout. A 12 volt DC adapter that can provide a
minimum of 800 mA is required
(See "Options" for accessories).
When the option "Electricity" is enabled:
• The option "Delay" is reduced and locked to 2
seconds to speed up the photo shooting.
• The "Multi-shot" speed is improved with a 2
seconds delay between each take.
• The option "Time Lapse" is disabled
• The option "Synchronize" is locked on
"Permanent"
to allow the transmission of
pictures immediately after recording.
• The option "Synchronize at" is ignored.
• If the option "Multi-shot" is enabled, the
transmission is performed once the series of
photos is recorded.
• The camera is synchronized with the server
every 10 min. and uses an average of 1.4Mb of
data per day excluding the weight of pictures
transmitted during this period.
• The viewing screen may light up momentarily
during synchronizations.
Sets the display language of the camera's menus.
15

Publicité

Table des Matières
loading

Table des Matières