Description; Operation - Sonnenkonig SECCO PICCOLO Mode D'emploi

05 - DESCRIPTION

This illustration is for reference purposes only. It may vary for different models. All rights
Note:
reserved.

06 - OPERATION

Use the supplied adapter with AC power supply. Insert the water tank into the dehumidifier.
1.
Insert the DC plug into the DC connector on the back of the unit and the adapter into the pow-
er outlet. The control lamp lights up (blue) and the fan runs continuously.
If the control lamp lights up red, please check if the water tank is inserted properly.
2.
The dehumidifier will stop drying the air automatically when the water reaches the maximum
3.
level, and the red indicator will light up, which means the water tank is full. Please turn off
the power before removing the tank. Remove the lid of the tank and pour away the water that
has accumulated. After that, put everything back in place.
Wipe the water tank and the dehumidifier and dry both.
4.
Air outlet
On/Off switch
LED
Water tank
EN
29