Operate The Belt Winder; Automatic Operation; Setting The Opening And Closing Times - Superrollo GW60 Manuel D'installation Et D'utilisation

i
13.1 Operate the belt winder
1.
Open the roller shutters.
A brief press of the button causes
the roller shutters to move to the
upper end point.
2.
Stop the roller shutters during
movement.
Briefly press any button.
3.
Close the roller shutters.
A brief press of the button causes
the roller shutters to move to the
lower end point.
i
14. Automatic operation; setting the opening and closing times
Same switching times every day
You can set an opening and closing time for the belt winder which is applica-
ble every day. Once this time is reached, the roller shutters will open or close
automatically.
Changing the switching times
You can change the switching times at any time. Please note that storing a new
time will delete the old settings.
NOTE
◆ In order to set the switching times, you have to carry out this step once in
order to set the time at which your roller shutters are to open or close. For example,
to 8:00, in order to open your roller shutters every morning at 8:00 hours.
◆ You must set at least one switching time, in order to activate automatic
operation.
◆ If you change the opening and / or closing times, your settings will not be executed
before the next day.
84
or or or
EN