Superrollo GW60 Manuel D'installation Et D'utilisation page 75

i
10. Surface-mounted installation
8.
Connect the power supply and the
solar sensor.
Now connect the power supply
and the solar sensor to the rear
side of the belt winder, if required.
Observe the connection symbols on
the type plate.
CAUTION
Incorrect connection of the plug
may result in destruction of the
belt winder.
◆ Plug both plugs true to side
into the opening. Observe the
connection symbols on the
type plate.
◆ Never insert the plugs onto the
PCB with force.
9.
Subsequently press the belt wind-
er into the wall bracket.
IMPORTANT
Feed the connection cables behind
the cable bracket.
Solar sensor
Click
Cable bracket
EN
Power supply
Connecting
cables
75