Superrollo GW60 Manuel D'installation Et D'utilisation page 82

i
12. Adjusting the end points
2.
IMPORTANT
Do not set the upper end point fully
to the mechanical stop position.
Release the buttons in time and do
not exceed the corresponding end
point. Failure to do so can lead to
overloading or damage to the roller
shutters and / or the drive.
Set the lower end point
3.
Simultaneously press and hold the
buttons.
The roller shutters move down.
4.
Release the buttons...,
...as soon as the roller shutters have
reached the desired position for the
lower end point. The roller shut-
ters stop and the lower end point
is stored.
IMPORTANT
When setting the lower end point,
ensure that the belt is not allowed
to slacken excessively when the end
point is reached.
82
+
+
EN