Blind Stitch - JUKI HZL-G220 Manuel D'instructions

Blind stitch

Attention
Folding fabrics
1
Fabric
(wrong side)
Finish line
0.5 to 0.6 cm
2
Fabric
(wrong side)
3
Fabric
(wrong side)
4
Guide
Fabric
(wrong side)
28
Pattern No.
Presser foot
Turn OFF the power switch before replacing the presser foot.
Basting line
Finish line
Fabric
(wrong side)
Finish line
Needle
Guide
Folded edge
Practical 07, 18 (Light-weight material)
Blind stitch presser foot (D)
Sewing overcasting stitches on the edge of fabric.
● Refer to page 27 for overcasting stitches.
Basting.
0.5 to 0.6 cm
Fold from basting line.
Leave 0.5 to 0.6 cm.
Align the guide of the presser foot with the folded
edge.
Turn the hand wheel and adjust with the zigzag
width adjusting dial so that stitches reach the
folded edge.
* Pay attention so that needle will not hit the presser foot.