System Requirements; Driver Installation - i-tec C31NANODOCKVGAPD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
USB-C Metal Nano Docking Station 4K HDMI VGA LAN + PD 100 W
MicroSD card reader
4.
SD card reader
5.
3.5 mm Combo Audio Jack (2.1 CH)
6.
Ethernet GLAN RJ-45 port - for Ethernet network / router / switch /
7.
HUB and Internet connection
VGA port
8.
3x USB-A 3.0 port – for connecting the USB devices
9.
USB-C port
10.

SYSTEM REQUIREMENTS

Hardware requirements: Requires USB-C interface with „DisplayPort
Alternate Mode" and „Power Delivery" support (not all devices / systems
with USB-C interface support this as standard) or Thunderbolt 3 port
Operating system: Windows 8/10 32/64bit, macOS X, Google Chrome,
Linux Android 6 and higher) with latest updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking
station are installed automatically on the system. Before installation
make sure that your system has installed the latest drivers for your
device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before
installation make sure that your mac has installed the latest OS for your
device.
CONNECTING A HDMI MONITOR
The docking station is equipped with 1x HDMI 4K Ultra HD port for the
connection of an external monitor or beamer with a HDMI interface. For
displaying your images you can use a modern plazma or LCD monitors
and TVs. The graphic chip, which is the heart of the docking station,
supports up to 4K resolution 3840x2160/30Hz. Connect the monitor to
the docking station using a highquality HDMI cable. During installation
of an additional monitor the screen of the notebook or tablet can flicker
which is a standard condition.
8 |
ENGLISH

Publicité

Table des Matières
loading

Table des Matières