System Requirements; Package Contents - i-tec THUNDERBOLT 2 Guide Rapide

Masquer les pouces Voir aussi pour THUNDERBOLT 2:

Mode d'emploi (6 pages)

Table Des Matières

Table des Matières

Les langues disponibles

i-tec THUNDERBOLT™ 2 Docking Station

INTRODUCTION

Thank you for purchasing the i-tec THUNDERBOLT™ 2 docking station. The docking station will

allow you easy and extremely powerful connection of all accessories to your Mac / PC. It offers two

Thunderbolt™ ports with the transmission speed of 20 Gb/s. One will be used for connecting your

Mac and the other one can be used for connection of other Thunderbolt™ devices such as external

drives or monitors.

Using the 4K HDMI interface you can connect any monitor with a resolution up to 4096x2160 pixels.

Then you have three USB 3.0 ports that can be used for connection of your USB devices as well as for

charging of phones, tablets, or other mobile devices.

Then you have a Gigabit Ethernet port for fast internet connection. A separated microphone input and

earphone output will allow conference calls as well as wonderful experience from movies or games.

Please, read the entire user manual carefully before you begin installation and start using the

docking station.

SPECIFICATION

2x Thunderbolt™ 2 (20 Gb/s, bidirectional input / output), backwards compatible with

Thunderbolt™ - you will use one port for connecting your Mac and the other one can be used for

connection of other Thunderbolt™ devices.

1x HDMI 1.4b output (resolution up to 4096 x 2160 pixels, HDCP compatible)

1x RJ-45 10/100/1000BASE-T Gigabit Ethernet network adapter

3x USB 3.0 (5 Gb/s, 1.5A, of which 1x USB charging as per the BC 1.2 specification)

1x 3.5 mm earphone stereo output

1x 3.5 mm microphone mono input

1x input for charging (DC 12V / 5A)