System Requirements; Driver Installation; Connecting Usb Devices - i-tec C31METAL4KDOCKPD Mode D'emploi

Quick Start / USB-C Metal 4K Doscking Station EN
Rear panel:
5. HDMI port
6. 3x USB-A 3.0 port
7. Power supply input
8. Ethernet GLAN RJ-45 port
9. USB-C Power Delivery port for connecting the docking station and charging your
laptop

SYSTEM REQUIREMENTS

Hardware requirements: Requires USB-C interface with „DisplayPort Alternate Mode" and
„Power Delivery" support (not all devices / systems with USB-C interface support this as
standard) or Thunderbolt 3 port – Windows 10 32/64bit, macOS X, Chrome OS and Android
6 (Google) with Intel Broadwell Processor and R51 and higher
Operating system: Windows 10, macOS X, Google (Chrome OS and Android 6) with latest
updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking station are installed
automatically on the system. Before installation make sure that your system has installed
the latest drivers for your device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before installation make sure
that your Mac has installed the latest OS for your device.
CONNECTING A HDMI MONITOR
The docking station is equipped with HDMI 4K Ultra HD port for the connection of an
external monitor or beamer with a HDMI interface. For displaying your images you can use
a modern plazma or LCD monitors and TVs. The graphic chip, which is the heart of the
docking station, supports up to 4K resolution 3840x2160px. Connect the monitor to the
docking station using a high-quality HDMI cable (we recommend HDMI version 1.4b and
higher). During installation of an additional monitor the screen of the notebook, tablet or
PC can flicker which is a standard condition.
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router / switch and to the
internet, it supports speeds of 10 / 100 / 1000 Mbps.

CONNECTING USB DEVICES

You can use USB 3.0 ports for connecting your keyboard, mouse, external hard drive, printer
and other devices or you can use it for connecting a USB HUB, which will give you more
free USB ports.
CHARGING
The docking station supports charging of USB mobile devices, such as smart phones,
e-book readers, multimedia players, navigation devices, and tablets. Simply connect the
device that you want to charge using the original cable to the USB port of the docking
station. The port on the front panel of the docking station is the most appropriate, because
it supports fast charging.
5