Set Point Menu Parameters; Displays The Set Point Currently In Use; Setting The Work Set Points For Cooling Mode; Setting The Work Set Points For Heating Mode - AERMEC NXW Série Manuel D'utilisation

SET POINT MENU parameters

SET POINT menu- Displays the set point currently in use
Visualisation on unit display
A
Setpoint
B
Courrent setpoint:
SET POINT menu - Setting the work set points for COOLING mode
Visualisation on unit display
A
Setpoint
B
Cooling setpoint 1:
C
Cooling setpoint 2:
Parameters that can be modified
by the user
SET POINT menu - Setting the work set points for HEATING mode
Visualisation on unit display
A
Setpoint
B
Heating setpoint 1:
C
Heating setpoint 2:
Parameters that can be modified
by the user
Index
A Set point: Indicates the work temperature.
B Current set point: indicates the work set point currently in
use on the basis of the envisioned functioning mode.
o
12.0 C
Index
A Set point: Indicates the work temperature.
B Cooling set point 1: indicates the temperature set with which
to make the unit work when cold.
C Cooling set 2: NOT USED.
o
12.0 C
o
--- C
Index
A
B
C
o
40.0 C
o
--- C
Display/Parameter
Display/Parameter
Display/Parameter
Set point: Indicates the work temperature.
Heating set point 1: indicates the temperature set with which
to make the unit work when hot.
Heating set 2: NOT USED.
9