Care & Maintenance; Maintenance Schedule - Power Fist 79cc OHV Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

V 4.0
DURING NORMAL USE
Stop the engine by following this procedure:
1. Move the throttle lever (I) to the MIN. position.
2. Turn the engine switch (J) to the OFF position.
3. Move the choke lever (C) to the OPEN position.
CARE & MAINTENANCE
WARNING! Always ensure that the engine is off before you
begin any maintenance or repairs. An active engine part can
cause a severe injury, amputation or death if a mishap occurs.
The following section includes a maintenance schedule, routine
inspection procedures and simple maintenance procedures using
basic hand tools. Service tasks that are more difficult or require special
tools are best handled by a technician or other qualified mechanic.
1.
Maintain the engine with care. A well-maintained engine is more
efficient and less likely to have problems.
2.
Follow instructions for servicing.
3.
Inspect the engine components periodically. Check fuel lines, tank,
cap and fittings frequently for cracks or leaks. Have damaged or worn
components repaired or replaced by an authorized technician.
4.
Replacement parts must match the original. Use manufacturer
recommended parts when possible.
5.
Disconnect the spark plug lead and keep it away from the spark
plug during maintenance and repairs.
6.
Maintain the engine's label and name plate. These carry important information. If
unreadable or missing, contact Princess Auto Ltd. for replacements.
IMPORTANT! Only qualified service personnel should repair the engine.

MAINTENANCE SCHEDULE

This schedule applies to normal operating conditions. If you operate your engine
under severe conditions, such as sustained high-load or high-temperature
operation or use in unusually wet or dusty conditions, consult a qualified
technician for recommendations applicable to your individual needs and use.
Visit www.princessauto.com for more information
79cc OHV Gas Engine
9

Publicité

Table des Matières
loading

Table des Matières