Faults / Troubleshooting; Decommissioning / Disposal - Dimplex HPK 300 Instructions D'installation Et D'utilisation

HPK 300

11 Faults / troubleshooting

This hydraulic tower is a quality product and is designed for trou-
ble-free operation. Should a fault occur, however, it will be indi-
cated on the heat pump manager display. In this case, consult
the "Faults and troubleshooting" page in the operating instruc-
tions of the heat pump manager. If you cannot correct the fault
yourself, please contact your after-sales service technician.
ATTENTION!
Work on the system must only be performed by authorised and qualified
after-sales service technicians!
452162.66.07 · FD 9611
12 Decommissioning /
disposal
Before removing the hydraulic tower, disconnect the machine
from the power source and close all valves. The heat pump must
be dismantled by trained personnel. Observe all environmental
requirements regarding the recovery, recycling and disposal of
materials and components in accordance with all applicable
standards.
English
EN-7