Moog infinity orange Mode D'emploi page 15

2. DIRECTIONS FOR USE
Step 3:
Turn bag upside down and
gently squeeze. Tilt bag
as needed to keep air at
tubing port (Figure 2-5).
Step 4:
Gently pinch orange colored
tubing below " " symbol.
Hold this position until air is
removed from tubing. Gently
squeeze bag at same time to
Figure 2-5 Squeeze Bag Figure 2-6 Pinch Tubing
assist fluid flow. If fluid does
not flow, pinch pressure may
be too strong. (Figure 2-6).
NOTE: Inside the orange
colored tubing, below the " "
symbol is the in-line occluder.
The in-line occluder is the
built-in anti free-flow valve.
By pinching tubing gently,
the tubing moves away
from the in-line occluder
Figure 2-7 Tubing Figure 2-8 Tubing Segment
allowing fluid to flow (Figure
Segment Being Pinched Being Punctured by Fingernail
2-7). It is important to only
pinch the tubing below the " " symbol to avoid damaging the in-line occluder.
NOTE: Be extremely careful to pinch tubing using only the flat, soft
part of your finger. Do not use fingernails when pinching tubing; doing
so may puncture the delivery set (Figure 2-8). If you suspect that the
delivery set has been punctured, please discard and use a new set
NOTE: Air may also be removed from tubing using the pump priming
feature. See step 7 for instructions on using the pump priming feature.
8
Infinity Orange Operator's Manual
® ®