Fein KBB40X Notice Originale page 12

OBJ_BUCH-0000000045-003.book Page 12 Tuesday, July 8, 2014 8:53 AM
en
12
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with basic insulation plus additional insulation on touchable, conductive parts con-
nected to the protective conductor.
Character Unit of measurement,
international
P W
1
P
W
2
U
V
f
Hz
-1
n /min, min
0
Ø mm
mm
Fe
kg
L
dB
pA
L
dB
wA
L dB
pCpeak
K...
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Unit of measurement,
national
W
W
V
Hz
, rpm, r/min rpm
mm
mm
kg
dB
dB
dB
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Explanation
Power input
Output
Rated voltage
Frequency
No-load speed
Diameter of a round part
Drilling capacity in steel (core drill bit)
Weight according to EPTA-Procedure 01/2003
Sound pressure level
Sound power level
Peak sound pressure level
Uncertainty
Basic and derived units of measurement from
the international system of units SI.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.