Brewing Milk-Based Coffee Beverages And Milk Froth; Special Drinks; How To Select Special Drinks; Dispensing Hot Water - Saeco Incanto HD8917 Mode D'emploi

English
20

Brewing milk-based coffee beverages and milk froth

Special drinks

How to select special drinks

Dispensing hot water

4219_460_3631_2_Lux_Booklet_A5_v2.indd 20
5 Pull out the milk froth dispensing spout completely to the right
to froth dispensing position.
Note: If the milk froth dispensing spout is not pulled out fully,
the milk carafe does not froth milk properly.
1 Place a cup under the open milk froth dispensing spout.
2 Choose your milk-based beverage.
- Press the CAPPUCCINO button to brew a cappuccino.
- Press the LATTE MACCHIATO button to brew a latte
macchiato.
- Press the MENU button, choose 'Drinks' and scroll down
through the drinks to select milk froth.
- The machine reminds you have to install the milk carafe and
pull out the milk froth dispensing spout.
3 The machine first dispenses a preset quantity of frothed milk into
the cup or glass and then dispenses a preset quantity of coffee.
- To stop dispensing milk or coffee, press the OK button.
4 After brewing milk-based coffee beverages, the display asks
you if you want to perform a quick clean of the milk carafe spout.
You have 10 seconds to perform the quick clean.You can perform
the quick clean while leaving the milk inside the milk carafe.
Remove the cup with the beverage and place a container under
the milk froth dispensing spout. Press the OK button twice to
confirm that you want to quick clean, or press the ESC button
to perform the quick clean later. It is recommended to perform
quick clean
at least once a day, see chapter 'Cleaning the milk carafe'.
1 Press the MENU button and select 'Drinks'.
2 Press the OK button to confirm.
3 Scroll the menu and select the desired beverage.

Inserting and removing the hot water dispensing spout

To insert the hot water dispensing spout:
21/07/17 14:30